First Attempt at Kite Aerial Photography (KAP)

I just started dabbling in Kite Aerial Photography (KAP), and I’ve found that once you experience getting your first rig up in the air and start seeing the actual results, you’ll immediately move on to pondering how to improve your design and execution. In other words, it can quickly turn into a very geeky hobby. Above is a short clip of my first flight. I was actually able to get the rig much higher  than what is shown, but I didn’t bother including any clips because the video became VERY unstable at such heights.

With the help of this online KAP resource, I built a Picavet to suspend the camera form the line. This is a must in terms of stabilization and to keep your camera pointed in one direction. It was quite windy during my flight, and I had a few problems with the rig getting tangled during launch as well as descent. I now realize that I made the Picavet sling WAY too long, which contributed to the problem.

Picavet

I’m currently using a lightweight keychain video camera that I purchased on eBay for about fifteen dollars. It’s not the best picture quality, and there is a lot of “wobble” in the captured video, but you can’t beat the price for getting started and  testing out the rig. Eventually I will upgrade to a higher resolution camera. The criteria is that it has to be cheap (in case it drops, bangs against rocks on the way to the ground, gets tangled in a helicopter, etc.) and obviously very lightweight. Another desireable feature would be the ability to take still photos at timed intervals.

Keychain camera

I’m using a Delta style kite (and my daughter is using a Dora kite), which is easy to fly even when the breeze is not very strong. Ironically,  I chose a day that was too breezy and my camera was blowing all over the place. The camera is so light that I think I’ll need to add some weight to anchor it next time out. Ideally, any added weight should be something that could be tweaked depending on just how breezy it is. Fishing weights may be the perfect solution.

Delta Kite

I was a bit too ambitious at first. I put heaps of line on my basic reel so that I could to get my kite to fly really high. I payed for it when my hands cramped up trying to reel all of the line back in. Unfortunately, my daughter is too young to help with the reeling back in part, however, she did offer plenty of moral support. Once the aches in my hands and arms subsided, I searched online for better reels, and ended up purchasing a ball-bearing, tangle-proof reel from Amazon for only about ten dollars. It should make reeling in the kite very fast and easy regardless of the height. I’ve already added line to the spool and am excited to give it a try, although it may be quite a while until we have another bout of warm enough weather on the east coast again. I just may have to buy a few more of these reels for my family, because we all know that while everyone loves flying kites, nobody enjoys the reeling in part.

Reel 2Reel 1

I’m quite excited about this new hobby and learning about how to achieve better results with it. Some things that I plan to do before the next flight include:

  • Shortening the Picavet sling.
  • Adding weight to the rig for stabilization.
  • Researching alternative and more advanced camera options.

Stay tuned for my future flight progress! Next to our development is a polo field, and it would be really neat to capture some aerial video of a polo match this spring. I do, however, have much to learn until then. In the meantime, enjoy these still photos from my inaugural flight:

Screen Shot 3 Screen Shot 4 Screen Shot 5 Screen Shot 6 Screen Shot 7 Screen Shot 8

Advertisements

3 thoughts on “First Attempt at Kite Aerial Photography (KAP)

  1. gizzardstone

    This is awesome! I have been wanting to try this but have not gotten to it. I have a parafoil kite that would be perfect for this and a 1st gen GoPro camera. I think the GoPro would be good as the fall might break the housing, but the camera should survive.

    Try using a tail for the kite. Some ribbon streamers should stabilize it and add drag without adding mass.

    I want to do this trailing a kite behind a bicycle or while I’m skiing. I’ve laso wanted to try putting a camera on a glider and using that as a follow cam.

    Looking forward to your future tests!

    -Mike

    Reply
  2. Pingback: Kite Aerial Photography (KAP) @ Secret Dad Society | The Gizzard StoneThe Gizzard Stone

  3. secretdadblog Post author

    Thanks for the comments, Mike!

    I love your idea for the kite behind the bicycle or while skiing. I may have to try that with my parafoil! The parafoil has a removable tail that I am going to attach to my delta during future KAP flights to stabilize it more, as per your suggestion.

    I also plan on getting a GoPro soon as well, especially as newer generations seem to be getting lighter and smaller.

    Good luck and be sure to report back about your own experiments!

    Reply

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s